Document


 

UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
WASHINGTON, D.C. 20549


 FORM SD
SPECIALIZED DISCLOSURE REPORT

TIFFANY & CO.
(Exact name of Registrant as specified in its charter)
 
Delaware
 
Commission File No. 001-9494
 
13-3228013
(State or other jurisdiction
of incorporation or organization)
 
 
 
(I.R.S. Employer
Identification No.)
 
 
200 Fifth Avenue, New York, New York 10010
 
 
 
 
(Address of Principal Executive Offices and Zip Code)
 
 
 
 
 
 
 
 
 
Leigh M. Harlan
 
 
 
 
Senior Vice President - Secretary and General Counsel
 
 
 
 
(212) 755-8000
 
 
 
 
(Name and telephone number, including area code, of
the person to contact in connection with this report)
 
 
 
Check the appropriate box to indicate the rule pursuant to which this form is being filed, and provide the period to which the information in this form applies:

X     Rule 13p-1 under the Securities Exchange Act (17 CFR 240.13p-1), for the reporting period from January 1 to December 31, 2019.






Section 1 - Conflict Minerals Disclosure    

Item 1.01    Conflict Minerals Disclosure and Report

Tiffany & Co. is a holding company that conducts business through its subsidiary companies (collectively, the “Company”). Through these subsidiaries, the Company sells jewelry and other items that it manufactures or contracts with third parties to manufacture to its specifications. The Company’s principal product category is jewelry, which represented 92% of worldwide net sales in the twelve-month period ended January 31, 2020 (“fiscal 2019”). Other finished goods sold by the Company include timepieces, leather goods, sterling silver goods (other than jewelry), china, crystal, stationery, eyewear, fragrances and other accessories, which represented, in total, 6% of worldwide net sales in fiscal 2019.

In fiscal 2019, approximately 60% of the jewelry sold by the Company was produced in Company-owned manufacturing facilities. The balance, and almost all non-jewelry items, were manufactured by third-party manufacturers to the Company’s specifications.

Approximately 98% of the gold used in the Company’s internally manufactured finished goods in fiscal 2019 was sourced directly by the Company from two mines and two refiners on the London Bullion Market Association Good Delivery List, each of which is located in the United States or Switzerland. The remaining 2% consisted of gold purchased directly by Company vendors from sources other than the Company for use in specialized components manufactured by such vendors and sold to the Company for use in the Company’s internally manufactured finished goods. The Company did not purchase raw tin, tantalum or tungsten for use in its internal manufacturing facilities; however, components purchased by the Company for use in internal manufacturing may contain these minerals.

The Company purchases finished goods from its third-party manufacturers. The Company purchases raw materials, components and fabricated materials used in Company-owned manufacturing facilities and, in some cases, by the third-party manufacturers, from vendors. The Company generally has long-term stable relationships with these third-party manufacturers and suppliers (collectively referred to herein as “vendors”). Vendor relationships are actively managed through a variety of channels, such as vendor contracts, vendor questionnaires, the Company’s Vendor Manual, which is an educational and training tool and mandate for vendors, and the Company’s Social Accountability Program, which supports vendor compliance with the Company’s Supplier Code of Conduct and incorporates Company risk assessments, vendor self-assessments and external audits of vendors. Information on the Social Accountability Program can be found at https://www.tiffany.com/sustainability.

In this report, the term “applicable products” is used to refer to gold and other raw materials and to components and fabricated materials that are, in each case, purchased from vendors to be used in the Company’s internal manufacturing as well as to finished goods that are purchased from third-party manufacturers for sale by the Company. The finished goods products that the Company ultimately sells to its customers (whether internally manufactured by the Company or purchased by the Company as finished goods from third-party manufacturers) are referred to herein as “finished goods”.












Conflict Minerals Disclosure

This Form SD is filed pursuant to Rule 13p-1 promulgated under the Securities Exchange Act of 1934, as amended (“Rule 13p-1”), for the reporting period January 1, 2019 to December 31, 2019. A copy of Tiffany & Co.’s Conflict Minerals Report (the “Conflict Minerals Report”) is provided as Exhibit 1.01 to this Form SD, and is publicly available together with this Form SD at https://investor.tiffany.com/corporate-governance. As Rule 13p-1 requires registrants to report certain information with respect to Conflict Minerals (as defined below) that are necessary to the functionality or production of products that they manufacture or contract to be manufactured, references herein to Conflict Minerals being in, contained in, used in, used on, supplied for use with or introduced into the Company’s applicable products, finished goods, Covered Products, or product categories shall be deemed to refer to those Conflict Minerals that are necessary to the functionality or production of such items.

Product Review

During 2019, the Company reviewed the finished goods that it manufactures either internally or pursuant to arrangements with third-party manufacturers (the “product review”). The objective of the product review was to identify finished goods that the Company manufactures or contracts to manufacture that may contain one or more of the following: the minerals gold, columbite-tantalite (coltan), cassiterite, or wolframite, or their derivatives tantalum, tin, and tungsten (the “Conflict Minerals”).

The product review was managed by the Company’s Conflict Minerals compliance program office (the “Program Office”) and was supported by a working group composed of representatives from departments across the Company, including finished goods development, global procurement, manufacturing, strategic sourcing, quality management, after sales service, and specific finished goods teams (the “Working Group”).

The Working Group consulted with product specialists throughout the Company who had in-depth knowledge with regard to specific categories of finished goods and the manufacturing of those goods. The product review covered all categories of finished goods sold by the Company and was designed to identify all finished goods manufactured in 2019 that were likely to contain Conflict Minerals.

The Company also considered the impact on finished goods of services provided by independent third-party repair service providers (the “service providers”). These service providers primarily perform after-sale service on customer-owned merchandise. However, the service providers may also, on occasion, perform alterations to finished goods in connection with an initial sale at the request of a customer (e.g., ring sizing) or perform repairs on damaged stock inventory, as needed. These services, to the extent that they involve augmentation of finished goods (e.g., through the addition of metal for sizing or the use of solder for repair), represent a distinct phase of the finished goods lifecycle. In conducting the product review, the Program Office and Working Group evaluated the Company’s finished goods at two points in that lifecycle, considering whether (1) the finished goods may have contained Conflict Minerals as a result of the manufacturing process (e.g., at the time the manufactured finished goods entered the Company’s inventory) and (2) Conflict Minerals may have been introduced into the finished goods after they had entered the Company’s inventory, as a result of pre-sale or concurrent-with-sale repairs and alterations.1
 
 
 
 
 

1 The Company notes that Exchange Act Rel. 34-67716, effective November 13, 2012, which adopted Rule 13p-1, states that the Securities and Exchange Commission does not consider “an issuer that only services, maintains, or







Form and Scope of Vendor Inquiries

Based on the product review, 177 vendors and service providers were identified as likely to supply the Company with applicable products in 2019 that were likely to contain Conflict Minerals. Requests to complete the Company’s Conflict Minerals survey were sent to these 177 vendors and service providers. A limited number of these vendors and service providers were permitted to certify the continuing applicability, completeness and accuracy of the information provided in response to the Company’s 2018 Conflict Minerals survey, rather than complete a new survey. The survey and these certifications are referred to collectively in this Form SD and the Conflict Minerals Report as the Company’s Conflict Minerals documentation.

The objective of the Company’s Conflict Minerals documentation was to confirm whether Conflict Minerals were contained in the applicable products supplied or to be supplied by the vendors, or were likely to be introduced into the finished goods through pre-sale or concurrent-with-sale repairs and alterations, and, if so, whether those Conflict Minerals originated in the Democratic Republic of the Congo or in a country that shares an internationally recognized border with the Democratic Republic of the Congo (the “Covered Countries”) or were from scrap or recycled sources.

The Conflict Minerals survey used by the Company in 2018 and 2019 was based on the conflict minerals reporting template developed by the Responsible Minerals Initiative (the “Conflict Minerals Reporting Template” or “CMRT”). However, in creating the survey, the Program Office made certain modifications to the CMRT to tailor it to the specific nature of the Company’s supply chain. The Company’s survey also included an inquiry as to which smelters or refiners process the Conflict Minerals used by vendors and services providers in the applicable products. This inquiry was included to enable the Company to determine whether the Conflict Minerals used by vendors and service providers originated with smelters or refiners that have: (a) received a “Conformant” designation from the Responsible Minerals Assurance Process of the Responsible Minerals Initiative; (b) been included on the “Good Delivery” list of the London Bullion Market Association; (c) been certified pursuant to the Responsible Jewellery Council’s Chain-of-Custody Standard; and/or (d) obtained an independent private sector audit that is publicly available. In this report, the term “Three Conflict-Free Smelter Programs” is used to refer collectively to the process, list and standard in (a) through (c) above.

After additional internal analysis, preliminary communications with vendors and service providers, and review of completed documentation, the Program Office determined that 154 of the 177 vendors and service providers either provided applicable products to the Company that contained Conflict Minerals that had entered the Company’s supply chain after January 31, 2013 to be used in the manufacture of the Company’s finished goods in 2019, or had provided pre-sale or concurrent-with-sale repairs and alterations in 2019 that might have introduced Conflict Minerals into the Company’s finished goods. Accordingly, the Program Office determined that these 154 vendors

 
 
 
 
 

repairs a product containing conflict minerals to be ‘manufacturing’ a product[.]” While the Company does not “only” service, maintain, or repair products, the Company considers its manufacturing process to be complete at the time finished goods enter the Company’s inventory for sale to customers. Nonetheless, in an effort to more fully understand the potential impact of Conflict Minerals on the finished goods sold to customers, the Program Office included pre-sale and concurrent-with-sale repairs and alterations in the scope of the product review and included the service providers that provide or support such services within the scope of its reasonable country of origin inquiry and its due diligence, as discussed in more detail in Exhibit 1.01. After-sale service on customer-owned merchandise was also determined to be outside the scope of the reasonable country of origin inquiry because such service was in no way part of the manufacturing process.










and service providers (the “RCOI vendors”) should be included within the scope of the Company’s reasonable country of origin inquiry.

Reasonable Country of Origin Inquiry

All 154 of the RCOI vendors completed the Company’s Conflict Minerals documentation. Based on their responses and the product review, the Program Office confirmed that, in 2019, 147 of the 154 RCOI vendors (approximately 95%) provided the Company with applicable products that contained gold, 16 of the 154 RCOI vendors (approximately 10%) provided the Company with applicable products that contained tin or tungsten, and none of the RCOI vendors provided the Company with applicable products that contained tantalum.

The Program Office reviewed the RCOI vendor responses to determine whether they were complete and internally consistent.  With respect to any RCOI vendor who identified a source other than a smelter or refiner (i.e., an intermediate source) as the source of the Conflict Minerals that the applicable RCOI vendor supplied to the Company or used to alter or repair the Company’s finished goods, the Program Office engaged with that intermediate source to seek to identify the smelter or refiner that processed the Conflict Minerals in the relevant applicable products. The Program Office ultimately identified at least one smelter or refiner as the source of the Conflict Minerals in each applicable product supplied to the Company, or used to alter or repair the Company’s finished goods, by the RCOI vendors.

Logical tests were then applied to evaluate whether the responses in the Conflict Minerals documentation provided by the RCOI vendors could be considered to be reasonably reliable and free of red flags that would cast doubt on the origin of the Conflict Minerals (the “red flag review”). The red flag review included, for example, tests such as: (i) confirming whether the smelters or refiners identified by the RCOI vendors (or by the intermediate sources) were among those designated or certified by, or included in, one or more of the Three Conflict-Free Smelter Programs or had obtained an independent private sector audit that is publicly available, (ii) cross-checking the responses of RCOI vendors that identified common suppliers that were not smelters or refiners, (iii) reviewing other information known by the Company with regard to the RCOI vendors, including the results of previous Social Accountability Program risk assessments and vendor audits, and (iv) reviewing the geographic proximity of RCOI vendors to their identified smelters or refiners and mine sources.

As a result of the red flag review, the Program Office identified certain RCOI vendors that required additional inquiry and further engaged directly with those RCOI vendors.

In evaluating the reliability and reasonableness of the vendor responses and, where applicable, the additional information provided by the RCOI vendors, and in reaching the conclusions set forth below, the Program Office considered the RCOI vendors’ familiarity with their supply chains, which was evidenced by their ability to identify at least one smelter or refiner as the source of any Conflict Minerals that the applicable RCOI vendor supplied to the Company or used to alter or repair the Company’s finished goods. Further, the Program Office was able to conduct an additional check of the reliability of the representations made by any RCOI vendor that identified as its source of Conflict Minerals a supplier to it that was also a direct vendor to the Company.

Finally, in evaluating the reasonableness of the information provided by the RCOI vendors as to the source of gold contained in their applicable products, or potentially introduced by them through pre-sale or concurrent-with-sale repairs and alterations, the Program Office noted that recent estimates










indicate that only approximately 3% of the world’s gold mine production occurs in the Covered Countries.2

Oversight of the Company’s Conflict Minerals Compliance and Reporting Process

The Company’s Conflict Minerals Program Steering Committee (the “Steering Committee”) included members of the Company’s management and other employees from the following departments: manufacturing, global procurement, legal, internal audit, finance, global sustainability, quality management and after sales service. The Steering Committee received periodic progress reports on, and exercised an oversight function with respect to, the Company’s Conflict Minerals compliance process, including the product review, reasonable country of origin inquiry, red flag review, and preparation of this Form SD and the Conflict Minerals Report. The Audit Committee of the Board of Directors of Tiffany & Co. also received a report on the compliance process and exercised an oversight function with respect to the filing of this Form SD and the Conflict Minerals Report.

Conclusions from Reasonable Country of Origin Inquiry

Based on the Company’s reasonable country of origin inquiry, the Company has determined that it has no reason to believe that Conflict Minerals used in the following finished goods product categories may have originated in the Covered Countries:

brooches/clips
charms
fragrance
key rings
leather accessories
rings
sundries (e.g., earring backs, clasps and other replacements and components sold independently to customers for post-sale customer service support)
timepieces

Additionally, based on its reasonable country of origin inquiry, the Company has determined that it has no reason to believe that any Conflict Minerals used by its service providers in pre-sale or concurrent-with-sale repairs and alterations on the Company’s finished goods may have originated in the Covered Countries, other than with respect to Conflict Minerals used by two service providers in connection with service on products sold in five Company stores in the United Arab Emirates and five Company stores in Singapore, as further described in the Conflict Minerals Report.

For eight categories of finished goods-bracelets, earrings, eyewear, flatware, necklaces and pendants, personal accessories (e.g., shirt studs, cuff links, and writing instruments), recognition awards, and table accessories (e.g., trays, vases, dinnerware, frames and candlesticks) -the Company has determined that the responses obtained in the Company’s Conflict Minerals

 
 
 
 
 

2 U.S. Geological Survey 2017 Minerals Yearbook [Advance Release].












documentation were insufficient to form the basis for a reasonable belief that none of the Conflict Minerals necessary to the functionality or production of the finished goods in those categories originated in a Covered Country. The Company has therefore exercised due diligence on the source and chain of custody of these Conflict Minerals as described in the Conflict Minerals Report.
 
Item 1.02

A copy of the Conflict Minerals Report is provided as Exhibit 1.01 to this Form SD. A copy of the Conflict Minerals Report together with this Form SD is publicly available at https://investor.tiffany.com/corporate-governance.

Section 2 - Exhibits

Item 2.01 Exhibits

The following exhibit is filed as part of this report:

Exhibit No.    Description

1.01        Conflict Minerals Report of Tiffany & Co.






SIGNATURE

Pursuant to the requirements of the Securities Exchange Act of 1934, the Registrant has duly caused this report to be signed on its behalf by the undersigned on April 24, 2020.

 
 
 
 
 
TIFFANY & CO.
 
 
(Registrant)
 
 
 
 
By:
 
 
/s/ Alessandro Bogliolo
 
 
Alessandro Bogliolo
 
 
Chief Executive Officer

 
 
 



Exhibit


Exhibit 1.01

TIFFANY & CO.
CONFLICT MINERALS REPORT

This Conflict Minerals Report of Tiffany & Co. and its subsidiary companies (collectively, the “Company”) has been prepared pursuant to Rule 13p-1 promulgated under the Securities Exchange Act of 1934, as amended (“Rule 13p-1”), for the reporting period January 1, 2019 to December 31, 2019.

Rule 13p-1 and Form SD set forth certain disclosure requirements regarding products that companies manufacture, or contract to manufacture, when: (a) those products contain one or more of the minerals gold, columbite-tantalite (coltan), cassiterite, or wolframite, or their derivatives tantalum, tin, and tungsten (the “Conflict Minerals”), excepting Conflict Minerals that, prior to January 31, 2013, were outside the supply chain; (b) those Conflict Minerals are necessary to the functionality or production of those products; and (c) those Conflict Minerals originated in the Democratic Republic of the Congo or in a country that shares an internationally recognized border with the Democratic Republic of the Congo (the “Covered Countries”).

As Rule 13p-1 requires registrants to report certain information with respect to Conflict Minerals that are necessary to the functionality or production of products that they manufacture or contract to be manufactured, references herein to Conflict Minerals being in, contained in, used in, used on, supplied for use with or introduced into the Company’s applicable products, finished goods, Covered Products, or product categories shall be deemed to refer to those Conflict Minerals that are necessary to the functionality or production of such items.
  
Section 1. Introduction

This Conflict Minerals Report provides a description of the measures that the Company has taken to exercise due diligence with respect to the Conflict Minerals contained in the finished goods that it manufactured either internally (“directly”) or pursuant to procurement arrangements with third-party manufacturers (“indirectly”) during 2019.

The objective of the Company’s due diligence measures was to identify the source and chain of custody of the Conflict Minerals used in finished goods manufactured directly or indirectly by the Company during 2019.

The finished goods that were the focus of the Company’s due diligence measures were those that, at the time they entered the Company’s inventory for sale to the Company’s customers, contained one or more Conflict Minerals that were supplied to the Company by a vendor whose responses to the Company’s sourcing inquiries were insufficient to form the basis for a reasonable belief that none of those Conflict Minerals originated in a Covered Country.

These finished goods are collectively referred to as the “Covered Products” for the purposes of this Conflict Minerals Report. In this Conflict Minerals Report, third-party manufacturers who supply the Company with finished goods and vendors who supply the Company with raw









materials, components and fabricated materials used in the Company’s internal manufacturing are referred to collectively as “vendors”.

Based on the results of the Company’s due diligence efforts described herein, with respect to the following eight product categories (which are composed of the Covered Products), the Company was unable to determine whether the Conflict Minerals contained in the products in such product categories in 2019 originated in the Covered Countries or financed or benefited armed groups in those countries:

bracelets
earrings
eyewear
flatware
necklaces and pendants
personal accessories (e.g., shirt studs, cuff links, and writing instruments)
recognition awards
table accessories (e.g., trays, vases, dinnerware, frames and candlesticks)

Section 2. Design of the Company’s Due Diligence Measures

The Company designed its due diligence measures to conform in all material respects with the framework set forth in the Organisation for Economic Co-operation and Development Due Diligence Guidance for Responsible Supply Chain of Minerals from Conflict-Affected and High Risk Areas (Second Edition), including the related supplements on gold, tin, tantalum and tungsten (collectively, “OECD Due Diligence Guidance”).

Summarized below are the design components of the Company’s Conflict Minerals compliance process as they relate to the five-step framework from the OECD Due Diligence Guidance and the Company’s position in the minerals supply chain as a “downstream” company:

Step 1. The Establishment of Strong Management Systems

a)
In 2014, the Board of Directors of Tiffany & Co. (the “Board”) adopted a Conflict Minerals policy, which, among other provisions, sets forth the Company’s expectations that its vendors and service providers will source Conflict Minerals that have been processed by a smelter or refiner that has obtained a “conflict-free” designation by a recognized industry group that requires an independent private sector audit or from an individual processing facility that has obtained an independent private sector audit that is publicly available. Such smelters and refiners include those that (a) received a “Conformant” designation from the Responsible Minerals Assurance Process of the Responsible Minerals Initiative; (b) are included on the “Good Delivery” list of the















London Bullion Market Association; and/or (c) are certified pursuant to the Responsible Jewellery Council’s Chain-of-Custody Standard. In this Conflict Minerals Report, the term “Three Conflict-Free Smelter Programs” is used to refer collectively to the process, list and standard described in the proceeding sentence.

The Conflict Minerals policy also details the Company’s expectations that its vendors and service providers complete annual training on the policy and annually submit Conflict Minerals documentation (as defined below).

b)
The Company’s Director of Compliance and Privacy leads the Company’s Conflict Minerals compliance process, and is the senior member of the Company’s Conflict Minerals program office (the “Program Office”), which exists within the Legal Department’s Compliance and Privacy Team. The Program Office facilitates the Company’s Conflict Minerals compliance activities, including the Company’s approach to due diligence on the source and chain of custody of the Conflict Minerals contained in the Covered Products.

The Company also has a Conflict Minerals Steering Committee (the “Steering Committee”), which includes members of the Company’s management and other employees from the following departments: manufacturing, global procurement, legal, internal audit, finance, global sustainability, and after sales service. The Steering Committee meets regularly to receive progress reports on, and to exercise an oversight function with respect to, the Company’s Conflict Minerals compliance process, including the product review and reasonable country of origin inquiry, each as described in Tiffany & Co.’s Form SD (the “Form SD”) as well as the red flag review and the preparation of the Form SD and this Conflict Minerals Report.

The Company’s Conflict Minerals compliance process is further supported by a working group composed of representatives from departments across the Company, including finished goods development, global procurement, manufacturing, strategic sourcing, quality management, after sales service, and specific finished goods teams (the “Working Group”). The Working Group assists the Program Office in identifying the vendors and service providers that are potential sources of raw materials, components, fabricated materials and finished goods that are likely to contain Conflict Minerals. The Working Group also assists the Program Office with providing training and other communications to vendors and service providers regarding the Conflict Minerals compliance process.

The Audit Committee of the Board also receives a report on the compliance process and exercises an oversight function with respect to the filing of the Form SD and this Conflict Minerals Report.

c)
The Company requests and obtains information from its vendors and service providers regarding the use and origin of Conflict Minerals in raw materials, components, fabricated materials and finished goods (collectively “applicable products”) supplied to the Company or used in pre-sale and concurrent-with-sale repairs and alterations through a survey that incorporates questions set forth in the conflict minerals reporting template












developed by the Responsible Minerals Initiative and other questions deemed relevant due to the nature of the Company’s supply chain. While each vendor and service provider is asked to complete the full survey each year, the Company occasionally grants a limited exception to permit vendors and service providers that completed a survey in the immediately preceding year to instead certify the continuing applicability, completeness and accuracy of the information provided in response to such previous survey. The survey and these certifications are referred to collectively in this Conflict Minerals Report as the Company’s Conflict Minerals documentation. The Program Office manages the documentation process, consolidates the Company’s Conflict Minerals compliance information, and provides management reporting to implement a system of supply chain controls and transparency.

The Company’s Conflict Mineral due diligence documentation is subject to the Company’s document retention policy, which mandates a five-year retention period for documents pertaining to the Company’s Conflict Minerals compliance process.

d)
The Company’s vendor contracts and its onboarding documentation for vendors and services providers include information about the Company’s Conflict Minerals policy and compliance expectations. Additionally, training is provided annually to vendors and service providers to educate them about Conflict Minerals and the Company’s Conflict Minerals policy.

e)
The Company has a Company-level grievance mechanism that provides a means for parties to report concerns about Conflict Minerals sourcing matters. It is included in the Company’s Conflict Minerals policy provided to vendors and service providers.

Step 2. Identification and Assessment of Risk in the Company’s Supply Chain

a)
The Program Office identifies the risk that Conflict Minerals are contained in the Company’s finished goods at two points in the finished goods lifecycle, considering whether (1) the finished goods may contain Conflict Minerals as a result of the manufacturing process (e.g., at the time the manufactured finished goods enter the Company’s inventory) and (2) Conflict Minerals may be introduced into the finished goods, after they had entered the Company’s inventory, as a result of pre-sale or concurrent-with-sale repairs and alterations.1 

During the annual Conflict Minerals compliance process, the Program Office, with support from the Working Group, identifies the vendors and service providers that are likely to supply the Company with applicable products that are likely to contain Conflict

 
 
 
 
 

1 The Company considers the impact on its finished goods of services provided by independent third-party repair service providers (the “service providers”). These service providers primarily perform after-sale service on customer-owned merchandise. However, the service providers may also, on occasion, perform alterations to finished goods in connection with an initial sale at the request of a customer (e.g., ring sizing) or perform repairs on damaged stock inventory, as needed. These services, to the extent that they involve augmentation of finished goods (e.g., through the addition of metal for sizing or the use of solder for repair), represent a distinct phase of the finished goods lifecycle.












Minerals. The Company then disseminates the Company’s Conflict Minerals documentation to these vendors and service providers. That documentation is designed to provide information with regard to the country of origin of, and the identity of the smelters and refiners that process, the Conflict Minerals contained in the Company’s finished goods. If a vendor or service provider identifies in its documentation response a source of Conflict Minerals that is not a smelter or refiner, the Program Office engages with that source, either directly or through the vendor or service provider, to seek to identify the applicable smelters or refiners.

b)
The Program Office analyzes the results of the Conflict Minerals documentation to assess the risk that the sourcing of the Conflict Minerals contained in the Company’s finished goods may have directly or indirectly financed armed groups in the Covered Countries. As part of the analysis, the Program Office evaluates the country of origin information provided by the vendors and service providers. In addition, the smelters and refiners identified through the survey process as the source of any Conflict Minerals contained in the applicable products are evaluated for designation or certification by, or inclusion in, one or more of the Three Conflict-Free Smelter Programs and/or to confirm whether such smelters and refiners had obtained an independent private sector audit that was publicly available.

The Company reviews each vendor and service provider response for completeness and internal consistency and to determine the reliability and reasonableness of the information provided through the application of certain logical tests (the “red flag review”).2 The Company then engages further with vendors and service providers who, on the basis of the red flag review, are identified as requiring further inquiry. Any vendor or service provider who provides applicable products containing Conflict Minerals that are processed by a smelter or refiner that is not among those designated or certified by, or included in, one or more of the Three Conflict-Free Smelter Programs, or which has not obtained an independent private sector audit that is publicly available, is included among those requiring further inquiry. In addition, any vendor or service provider who identified as the source of Conflict Minerals any supplier other than a smelter or refiner is included among those requiring further inquiry.

In performing its risk assessment, the Company recognizes that it may not receive a survey response from all applicable vendors and service providers and that, in the absence of a response, it may be the case that a non-responsive vendor or service provider introduced Conflict Minerals that originated in a Covered Country into the Company’s finished goods. Further, the Company notes that, with respect to those vendors and

 
 
 
 
 

2 The red flag review includes, for example, tests such as: (i) confirming whether the smelters or refiners identified in the survey process are among those designated or certified by, or included in, one or more of the Three Conflict-Free Smelter Programs or had obtained an independent private sector audit that is publicly available, (ii) cross-checking the responses of RCOI vendors that identify common suppliers that are not smelters or refiners, (iii) reviewing other information known by the Company with regard to the RCOI vendors, including the results of previous Social Accountability Program risk assessments and vendor audits, and (iv) reviewing the geographic proximity of RCOI vendors to their identified smelters or refiners and mine sources.












service providers that do provide responses, the sourcing information provided may, in some cases, be insufficient for the Company to form the basis for a reasonable belief that none of the Conflict Minerals contained in the applicable products provided by such vendors or introduced by such service providers could have originated in the Covered Countries. The Program Office acknowledges the potential risk introduced by these non-responsive vendors and service providers and by those that respond but provide insufficient sourcing information (collectively, the “Designated Vendors”) and identifies these Designated Vendors for further diligence and inclusion in the Company’s Conflict Minerals risk management plan.

Step 3. Design and Implementation of Strategies to Respond to Identified Risks

a)
The Steering Committee is kept apprised of the risk assessment process and outcome, and the underlying circumstances that result in Designated Vendors being subject to due diligence, through regular updates, and reviews and discusses these matters during Steering Committee meetings.

b)
As part of its effort to mitigate the risk that the sourcing of Conflict Minerals used in the Company’s finished goods may have directly or indirectly financed armed groups in the Covered Countries, the Company established Designated Vendor response protocols to guide its response to any identified risk. These protocols are defined within the Company’s overall Conflict Minerals risk management plan and include, for example, processes for escalation to the Company’s management of certain vendor information as well as processes for the implementation of corrective action plans for vendors. In addition to these protocols, which focus on risks related to Designated Vendors, the Company more generally manages Conflict Minerals-related risks in its supply chain by working with the vendors and service providers identified as likely to provide the Company with Conflict Minerals to improve their Conflict Minerals chain of custody information and to further educate them about Conflict Minerals and the Company’s Conflict Minerals policy and compliance process.

c)
The Program Office implements the Company’s Conflict Minerals training procedures and its vendor response protocols. Among the Program Office’s specific responsibilities are the creation of educational materials, the tracking and documentation of communications with vendors and service providers and the planning and management of risk mitigation efforts, including corrective action plans. From time to time, the Company’s management may determine that, in light of business and compliance considerations, it is no longer in the Company’s best interest to continue working with certain vendors and service providers.

d)
The Company recognizes that additional risk exists when new vendors and service providers are being selected and engaged as well as when circumstances change with respect to existing vendors and service providers. To mitigate such risk, the Company undertakes additional fact and risk assessments with potential new vendors and service providers as well as those who have undergone changes of control or material changes in operations or who have been subject to other changes in circumstance that are likely to













alter their Conflict Minerals-related risk profile.

Step 4. Independent Third-Party Audits of Company’s Supply Chain

In light of the Company’s position in the supply chain and consistent with the Statement on the Effect of the Recent Court of Appeals Decision on the Conflict Minerals Rule, made public by the Securities and Exchange Commission on April 29, 2014, the Company does not conduct or commission independent third-party audits of the smelters and refiners from which its vendors and service providers source Conflict Minerals. However, as discussed above, the Company’s Conflict Minerals compliance process relies on certain industry initiatives, such as the Three Conflict-Free Smelter Programs, for independent third-party audit information.

The Company also supports independent third-party audits of smelters and refiners through its membership with the Responsible Minerals Initiative.

Step 5. Reporting on Supply Chain Due Diligence

Tiffany & Co. provides a public report of its due diligence measures with regard to the sourcing of Conflict Minerals. A copy of this report is available at https://investor.tiffany.com/corporate-governance.

Pursuant to Rule 13p-1, Tiffany & Co. prepares and submits a Conflict Minerals Report each year.

Additional information on the Company’s responsible sourcing practices is available at https://www.tiffany.com/sustainability/.

Section 3. Due Diligence Measures Performed by the Company

The Company’s due diligence measures performed for the Covered Products in calendar year 2019 included the following activities:

The Program Office, with support from the Working Group, identified 177 vendors and service providers that were likely to supply the Company with applicable products that likely contained Conflict Minerals. The Program Office sent the Company’s Conflict Minerals survey to these 177 vendors and service providers. A limited number of these vendors and service providers were permitted to certify the continuing applicability, completeness and accuracy of the information provided in response to the Company’s 2018 Conflict Minerals survey, rather than complete a new survey.
The Company’s 2018 and 2019 Conflict Minerals surveys incorporated questions set forth in the conflict minerals reporting template developed by the Responsible Minerals Initiative and other questions deemed relevant due to the nature of the Company’s supply chain.
Through additional analysis and communications with vendors and service providers, the Program Office was able to confirm that 154 vendors and service providers (“RCOI Vendors”) supplied the Company with applicable products that contained Conflict













Minerals. The Company received completed Conflict Minerals documentation from all 154 RCOI vendors.
The Program Office reviewed the completed documentation, assessed the information provided, and evaluated the identified smelters and refiners for designation or certification by, or inclusion in, one or more of the Three-Conflict-Free Smelter Programs and/or to confirm whether such smelters and refiners had obtained an independent private sector audit that was publicly available. Each vendor response was analyzed for completeness and internal consistency and to determine the reliability and reasonableness of the information provided through the red flag review.
The Company then engaged further with vendors and service providers who, on the basis of the red flag review, were identified as requiring further inquiry. This included any vendor or service provider who identified as the source of Conflict Minerals any supplier other than a smelter or refiner. It also included any vendor or service provider who identified a smelter or refiner that had not been designated or certified by, or included in, one or more of the Three-Conflict Free Smelter Programs or had not obtained an independent private sector audit that is publicly available.
As a result of the risk assessment, the Company identified nine Designated Vendors. The Program Office followed up with telephonic and/or written communications to the Designated Vendors to seek to determine the source and chain of custody of the Conflict Minerals used by these vendors or service providers. The information received from these vendors and service providers is reflected in this Conflict Minerals Report.
The Steering Committee received five updates, in which the Program Office reported on the Company’s Conflict Minerals compliance process, including the product review, reasonable country of origin inquiry, red flag review and due diligence.
The Program Office prepared, with the assistance of the Steering Committee, the Form SD and this Conflict Minerals Report.
The Audit Committee of the Board reviewed and discussed a report summarizing the Company’s Conflict Minerals compliance findings and the Form SD and this Conflict Minerals Report.
While the Company did not conduct or commission independent third-party audits of the smelters and refiners from which its vendors and service providers source Conflict Minerals, as discussed above, the Company’s Conflict Minerals compliance process relied on certain industry initiatives, such as the Three Conflict-Free Smelter Programs, for independent third-party audit information.
The Program Office, with support from the Working Group, distributed Conflict Minerals training and the Company’s Conflict Minerals policy to the vendors and service providers who were likely to supply the Company with applicable products that were likely to contain Conflict Minerals. The training and policy were translated into these vendors’ and service providers’ preferred languages.
With the preparation and submission of this Conflict Minerals Report, the Company has provided a public report of its due diligence measures with regard to the sourcing of Conflict Minerals. A copy of this report is available at https://investor.tiffany.com/corporate-governance.



















Section 4. Product Categorization; Result of Due Diligence

Based on the information provided by vendors for 2019, and after exercising the due diligence measures described above, the Company could not, with respect to seven vendors who supplied the Company with Conflict Minerals used in Covered Products in 2019, form the basis for a reasonable belief that none of those Conflict Minerals originated in a Covered Country.

With respect to two of these seven vendors, the Company was unable to form such a basis because some of the solder that was used to manufacture certain of the Company’s bracelets, earrings, and necklaces and pendants may have contained tin that originated in a Covered Country. \The solder containing such tin was used in less than 1% of all jewelry products in the Company’s inventory in 2019, and, for those products that did contain such solder, the tin at issue accounted for less than 4% of the total solder weight of any such product. The RCOI vendors who provided applicable products to the Company with such solder provided a representation to the Company that all tin used by such RCOI vendors was processed by a smelter that was designated, certified by, or included in one or more of the Three-Conflict Free Smelter Programs. However, the Company has been unable to confirm the identity of the specific smelter that processed the tin used in the solder supplied to the Company, and, as such, the Company has not been not been able to determine the mine of origin for such tin through its due diligence process. Accordingly, the Company cannot confirm that such tin did not originate in a Covered Country.

The remaining five vendors supplied Conflict Minerals used in certain of the Company’s eyewear, flatware, personal accessories, recognition awards, and table accessories products. With respect to such product categories, the Company was unable to confirm the identity of the specific smelter or refiner that processed the gold and/or tin contained in such products from among the smelters and refiners identified by the RCOI vendors as sources to such RCOI vendors, and, in the case of eyewear, was further unable to confirm that there were not additional smelters or refiners beyond those identified by the applicable RCOI vendor in its Conflict Minerals documentation.

As a result of the above, and the Company’s further inability to ascertain whether the underlying Conflict Minerals may have directly or indirectly financed armed groups in the Covered Countries, the Company was unable to determine whether the Covered Products containing those Conflict Minerals qualify as “DRC Conflict Free,” as defined under Rule 13p-1.

The smelters and refiners that were identified through the Company’s due diligence process for the bracelets, earrings, eyewear, flatware, necklaces and pendants, personal accessories, recognition awards, and table accessories product categories are listed below:

Metal
Smelters or Refiners Facility Name
Facility Location
Gold
Gold
Gold
Gold
Gold
Gold
Gold
Gold
Gold

8853 S.p.A.*
Advanced Chemical Company*
Allgemeine Gold-und Silberscheideanstalt A.G.*
Argor-Heraeus S.A.*
Asahi Refining Canada Ltd.*
Asahi Refining USA Inc.*
Aurubis AG*
BLS S.p.A.*
Bauer-Walser AG*

Italy
United States of America
Germany
Switzerland
Canada
United States of America
Germany
Italy
Germany






Gold
Gold
Gold
Gold
Gold
Gold
Gold
Gold
Gold
Gold
Gold
Gold
Gold
Gold
Gold
Gold
Gold
Gold
Gold
Gold
Gold
Gold
Gold
Gold
Gold
Gold
Gold
Gold
Gold
Gold
Gold
Gold
Gold
Gold
Gold
Gold
Tin
Tin
Tin
Tin
Tin
Tin
Tin
Tin
Tin
Tin
Tin
Tin
Tin

Tin
Tin
Tin
Tin
Tin

C. Hafner GmbH + Co. KG*
Chimet S.p.A.*
Cookson Metaux Precieux - Cookson CLAL*
Dr. Berndhard Burger AG
Federal Refining, Inc.
Gold Depot, Inc.
Heimerle + Meule GmbH*
Heraeus Metals Hong Kong Ltd.*
Heraeus Precious Metals GmbH & Co. KG*
Hilderbrand & Cie SA*
Ishifuku Metal Industry Co., Ltd.*
Italpreziosi*
Kennecott Utah Copper LLC*
LS-NIKKO Copper Inc.*
Matsuda Sangyo Co., Ltd.*
Metalor Technologies (Hong Kong) Ltd.*
Metalor Technologies (Singapore) Pte., Ltd.*
Metalor Technologies (Suzhou) Ltd.*
Metalor Technologies S.A.*
Metalor USA Refining Corporation*
Metalurgica Met-Mex Penoles S.A. De C.V.*
Mitsubishi Materials Corporation*
PAMP S.A.*
Progold S.p.A.*
PX Precinox S.A.*
Rand Refinery (Pty) Ltd.*
Royal Canadian Mint*
Safimet S.p.A*
SEMPSA Joyeria Plateria S.A.*
T.C.A S.p.A*
Tanaka Kikinzoku Kogyo K.K.*
Umicore Brasil Ltda.*
Umicore S.A. Business Unit Precious Metals Refining*
United Precious Metal Refining, Inc.*
Valcambi S.A.*
WIELAND Edelmetalle GmbH*
Alpha*
An Vinh Joint Stock Mineral Processing Company
Chenzhou Yunxiang Mining and Metallurgy Co., Ltd.*
Chifeng Dajingzi Tin Industry Co., Ltd.*
China Tin Group Co., Ltd.*
CV Ayi Jaya*
CV Dua Sekawan*
CV Gita Pesona*
CV United Smelting*
CV Venus Inti Perkasa*
Dongguan CiEXPO Environmental Engineering Co., Ltd.
Dowa*
Electro-Mechanical Facility of the Cao Bang Minerals & Metallurgy Joint Stock Company
EM Vinto*
Estanho de Rondonia S.A.
Fenix Metals*
Gejiu City Fuxiang Industry and Trade Co., Ltd.
Gejiu Fengming Metallurgy Chemical Plant*


Germany
Italy
France
Germany
United States of America
United States of America
Germany
China
Germany
Switzerland
Japan
Italy
United States of America
South Korea
Japan
China
Singapore
China
Switzerland
United States of America
Mexico
Japan
Switzerland
Italy
Switzerland
South Africa
Canada
Italy
Spain
Italy
Japan
Brazil
Belgium
United States of America
Switzerland
Germany
United States of America
Vietnam
China
China
China
Indonesia
Indonesia
Indonesia
Indonesia
Indonesia
China
Japan
Vietnam

Bolivia
Brazil
Poland
China
China







Tin
Tin
Tin
Tin
Tin
Tin
Tin
Tin
Tin
Tin
Tin
Tin
Tin
Tin
Tin
Tin
Tin
Tin
Tin
Tin
Tin
Tin
Tin
Tin
Tin
Tin
Tin
Tin
Tin
Tin
Tin
Tin
Tin
Tin
Tin
Tin
Tin
Tin
Tin
Tin
Tin
Tin
Tin
Tin
Tin
Tin
Tin
Tin
Tin
Tin
Tin
Tin
Tin
Tin
Tin

Gejiu Kai Meng Industry and Trade LLC*
Gejiu Non-Ferrous Metal Processing Co., Ltd.*
Gejiu Yunxin Nonferrous Electrolysis Co., Ltd.*
Gejiu Zili Mining and Metallurgy Co., Ltd.*
Guangdong Hanhe Non-Ferrous Metal Co., Ltd.*
Guanyang Guida Nonferrous Metal Smelting Plant*
HuiChang Hill Tin Industry Co., Ltd.*
Huichang Jinshunda Tin Co., Ltd.*
Jiangxi New Nanshan Technology Ltd.*
Ma'anshan Weitai Tin Co., Ltd.*
Magnu's Minerais Metais e Ligas Ltda.*
Malaysia Smelting Corporation (MSC)*
Melt Metais e Ligas S.A.*
Metallic Resources, Inc.*
Metallo Belgium N.V.*
Metallo Spain S.L.U.*
Mineracao Taboca S.A.*
Minsur*
Mitsubishi Materials Corporation*
Modeltech Sdn Bhd
Nghe Tinh Non-Ferrous Metals Joint Stock Company
O.M. Manufacturing (Thailand) Co., Ltd.*
O.M. Manufacturing Philippines, Inc.*
Operaciones Metalurgicas S.A.*
Pongpipat Company Limited
Precious Minerals and Smelting Limited
PT Aries Kencana Sejahtera*
PT Artha Cipta Langgeng*
PT ATD Makmur Mandiri Jaya*
PT Babel Inti Perkasa*
PT Babel Surya Alam Lestari*
PT Bangka Prima Tin*
PT Bangka Serumpun*
PT Bangka Tin Industry*
PT Belitung Industri Sejahtera*
PT Bukit Timah*
PT DS Jaya Abadi*
PT Inti Stania Prima*
PT Karimun Mining*
PT Kijang Jaya Mandiri*
PT Menara Cipta Mulia*
PT Mitra Stania Prima*
PT Panca Mega Persada*
PT Premium Tin Indonesia*
PT Prima Timah Utama*
PT Rajawali Rimba Perkasa*
PT Rajehan Ariq*
PT Refined Bangka Tin*
PT Sariwiguna Binasentosa*
PT Stanindo Inti Perkasa*
PT Sukses Inti Makmur*
PT Sumber Jaya Indah*
PT Timah Tbk Kundur*
PT Timah Tbk Mentok*
PT Tinindo Inter Nusa*

China
China
China
China
China
China
China
China
China
China
Brazil
Malaysia
Brazil
United States
Belgium
Spain
Brazil
Peru
Japan
Malaysia
Vietnam
Thailand
Philippines
Bolivia
Myanmar
India
Indonesia
Indonesia
Indonesia
Indonesia
Indonesia
Indonesia
Indonesia
Indonesia
Indonesia
Indonesia
Indonesia
Indonesia
Indonesia
Indonesia
Indonesia
Indonesia
Indonesia
Indonesia
Indonesia
Indonesia
Indonesia
Indonesia
Indonesia
Indonesia
Indonesia
Indonesia
Indonesia
Indonesia
Indonesia






Tin
Tin
Tin
Tin
Tin
Tin
Tin
Tin
Tin
Tin
Tin
Tin
Tin
Tin

PT Tirus Putra Mandiri*
PT Tommy Utama*
Resind Industria e Comercio Ltda.*
Rui Da Hung*
Soft Metais Ltda.*
Super Ligas
Thai Nguyen Mining and Metallurgy Co., Ltd.*
Thaisarco*
Tin Technology & Refining*
Tuyen Quang Non-Ferrous Metals Joint Stock Company
White Solder Metalurgia e Mineração Ltda.*
Yunnan Chengfeng Non-ferrous Metals Co., Ltd.*
Yunnan Tin Company Limited*
Yunnan Yunfan Non-ferrous Metals Co., Ltd.*

Indonesia
Indonesia
Brazil
Taiwan, Province of China
Brazil
Brazil
Vietnam
Thailand
United States of America
Vietnam
Brazil
China
China
China


*Indicates smelters or refiners that have been designated or certified by, or included in, one or more of the Three Conflict-Free Smelter Programs as of January 1, 2020.

The Company’s efforts to determine the mine of origin for the Conflict Minerals contained in the bracelets, earrings, eyewear, flatware, necklaces and pendants, personal accessories, recognition awards and table accessories product categories consisted of the due diligence measures described in this Conflict Minerals Report. Despite these efforts, the Company does not have sufficient information to conclusively determine the countries of origin of the Conflict Minerals in these eight product categories or whether they originated from recycled or scrap sources. Based on the information provided by the Company’s vendors and their direct suppliers, as well as from the Responsible Minerals Initiative and other sources, the Company believes that the countries of origin of the Conflict Minerals in these eight product categories may include, Argentina, Australia, Benin, Bolivia, Brazil, Burundi, Canada, Chile, China, Colombia, Democratic Republic of the Congo, Ecuador, Eritrea, Ghana, Guinea, Guyana, Indonesia, Japan, Laos, Malaysia, Mali, Mauritania, Mongolia, Myanmar, Nicaragua, Nicaragua, Niger, Nigeria, Peru, Portugal, Russia, Rwanda, Swaziland, Taiwan, Thailand, Togo, Uganda, United Kingdom, United States of America, Venezuela, and Vietnam and may also include recycled or scrap sources.

As discussed in the first footnote of this Conflict Minerals Report, the Company also considered whether Conflict Minerals could be introduced into finished goods sold by the Company after manufacture was completed and such finished goods entered the Company’s inventory, but before or in connection with a sale to a customer, through repairs to damaged stock inventory or customer-requested alterations made in connection with a sale.

In order to more fully understand the impact of Conflict Minerals on its finished goods, the Company exercised the same due diligence procedures with respect to Designated Vendors that were service providers that it exercised with respect to Designated Vendors that provided the Company with finished goods and other applicable products used in the Company’s direct and indirect manufacturing processes. Following the exercise of such due diligence, with respect to two of the service providers, the Company could not form a basis for a reasonable belief that none of the Conflict Minerals that may have been introduced into the finished goods by these two service providers as a result of pre-sale or concurrent-with-sale repairs and alterations












originated in a Covered Country.3 The Company was unable to form such a basis for one of these service providers because some of the gold that is used by such service provider may have originated in a Covered Country. However, this service provider provided a representation to the Company that all gold used by such service provider was processed by a smelter that was designated, certified by, or included in one or more of the Three-Conflict Free Smelter Programs. For the second such service provider, the Company was unable to confirm the identity of the specific smelter or refiner that provided gold for use by such service provider in its provision of services to the Company.

Section 5. Anticipated Future Actions

The Company expects to continue to engage directly with its existing vendors and service providers, and any new vendors and service providers, to work to identify the source and chain of custody of Conflict Minerals contained in applicable products supplied to the Company or potentially introduced into finished goods as a result of pre-sale or concurrent-with-sale alterations and repairs, and to evaluate and manage any related risks.

Section 6. Independent Private Sector Audit

For the 2019 reporting period, consistent with the Statement on the Effect of the Recent Court of Appeals Decision on the Conflict Minerals Rule, made public by the Securities and Exchange Commission on April 29, 2014, the Company did not obtain an independent private sector audit.4 

* * * * *
 
 
 
 
 

3 These two service providers provided or supported alteration and repair services for finished goods presented in five Company stores in the United Arab Emirates and five Company stores in Singapore.

4 https://www.sec.gov/News/PublicStmt/Detail/PublicStmt/1370541681994